Table of Contents
Advertisement
1662/1664 Barcode Scanner
HOW TO UPGRADE 3610 FIRMWARE
Connect 3610 to the USB port of PC after installing its driver. Refer to
3610
for the target scanner to connect to 3610.
Note: While upgrading 3610 firmware, the system automatically use the VCOM_CDC
driver if the current connection interface is HID. Make sure the VCOM_CDC driver has
been installed on your computer (for firmware 2.0 or later).
UPGRADE 3610 CPU FIRMWARE
1) Read the following barcodes in sequence for 3610 to enter the download mode. The
Communication LED on 3610 will be flashing red to indicate it is ready for
downloading.
2) Run the download utility "ProgLoad.exe" on your computer.
Kernel Program
K3610_V*.shx
246
User Guide
Enter Setup
Download 3610
CPU Firmware
User Program
STD3610_V*.shx
For
the
communication
"RS-232" and the correct COM port for USB
Virtual COM interface.
Ignore the baud rate setting.
For the file option, click [Browse] to select
the target file for firmware update.
Click [OK].
Enter Setup
3.1.1 Connect to
settings,
select
Hide quick links:
Advertisement
Table of Contents
