Bluetooth ® Spp Slave; Bluetooth Spp Slave; Activate Bluetooth Spp, Slave Mode; Inter-Function Delay - CipherLab 1662 User Manual

2.2 BLUETOOTH SPP SLAVE
®
®
For Bluetooth SPP Slave, refer to
connection settings.
2.2.1 ACTIVATE BLUETOOTH
This is SPP Slave Mode.

2.2.2 INTER-FUNCTION DELAY

By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254
in units of milliseconds, to match the computer response time of the keyboard interface.
Such delay time is inserted between every function code (0x01 ~ 0x1F) being
transmitted. The longer the delay time is, the slower the transmission speed will be.
1) Read the barcode above to specify the inter-function delay.
2) Read the "Decimal
milliseconds).
3) Read the "Validate" barcode on the same page to complete this setting.
Chapter 3 – Setting up a WPAN Connection
SPP SLAVE MODE
®
Value" barcode on page 261 for the desired inter-function delay (in
Chapter 2
*Auto reconnect
immediately
Auto reconnect on
data being scanned
Auto reconnect off
Activate Bluetooth
SPP, Slave Mode
Inter-Function
Delay... (*0~254)
Update
Selecting Output Interface
for related
®
69