CipherLab 1662 User Manual page 8

2.13 Mar. 20, 2013
2.12 Dec. 24, 2012
2.11 July 04, 2012
2.10 Jun. 18, 2012
2.01 Apr. 10, 2012
2.00 Mar. 20, 2012
1.03 Feb. 06, 2012
1.02 Jan. 11, 2012
1.01 Dec. 28, 2011
1.00 Nov. 30, 2011
Add: 2.3.1 Activate Bluetooth SPP Master Mode – 2D barcode
for connecting to a target device
Add: 3.1.1 Connect to 3610 – 2D barcode for connecting to 3610
New: Quick Start – Create 2D One-Scan Barcode
Modified: 1.12 Negative Barcodes (1664 Only)
Modified: 1.13.2 Disable Direct USB Interface barcode number
Modified: 4.16.1 Convert to ISBN (support for 979 prefix removed)
Modified: 4.16.2 Convert to ISSN (1664 Only)
Modified: 2.5.1/2.7/3.1 Required USB Virtual COM Driver version 5.4
New: 2.7.2 Activate USB Virtual COM_CDC barcode (100010) added
Modified: Appendix I Firmware Upgrade – Direct USB Virtual
COM_CDC barcode (100010) added
Add: 5.8 AIM Code ID
Add: List the Current Settings: Simple Pairing Status, Code Type
Add: 4.18.1 UPC-A Convert to EAN-13
Add: 1.1.1 Power Level and 1.2.3 Free Memory
Add: 2.1.1/2.4.1/2.6.1 HID for PCAT (Swiss German) and PCAT (Danish)
Add: 2.1.7/2.4.6/2.6.6 Special Keyboard Feature
Add: 2.1.9 Simple Pairing for iPhone/iPad
Add: Appendix V Family Name/First Name/ Middle Name Truncation and
check the file type of ANSI
Modified: 1.10 remove Reading Redundancy – Three times
Add: 1662 model and Set Up Drivers License
Add: Chapter 6 Fields of Time Stamp
Modified: Specifications: Dimension and Weight description
Add: 1.1.2 add delay note for activating the scanner from power off
mode
Initial release