Hid Character Transmit Mode; Special Keyboard Feature; Usb Polling Interval - CipherLab 1662 User Manual

1662/1664 Barcode Scanner

2.6.5 HID CHARACTER TRANSMIT MODE

By default, HID interface sends data to the host in batch, or use the scanner to read the
"By Character" barcode to process data one character at a time.

2.6.6 SPECIAL KEYBOARD FEATURE

By default, the special keyboard feature is based on the factory definition. You can decide
whether to apply the special keyboard feature. Refer to

2.6.7 USB POLLING INTERVAL

Scan the barcodes below to specify the USB polling interval ranging from 1 to 15ms. It's
set to 10ms by default.
1) Read the barcode above to specify the USB polling interval.
2) Read the "Decimal
milliseconds).
3) Read the "Validate" barcode on the same page to complete this setting.
98
User Guide
Value" barcode on page 261 for the desired time period (in
*Batch Processing
By Character
Keyboard Wedge
*Apply
Bypass
Set USB polling
interval 1~15 ms
(*10)
Enter Setup
Table.