Scanning Timeout - CipherLab 1662 User Manual

1.8 SCANNING TIMEOUT

Specify the scanning time interval (1~254 sec.; 0= Disable) when the scan mode is set
to any of the following –
Laser mode
Auto Off mode
Auto Power Off mode
Aiming mode (1664 Only)
1) Read the barcode above to specify the time interval in seconds before the scan
engine times out.
2) Read the "Decimal
scanner to shut down automatically after being idle for 15 seconds.
3) Read the "Validate" barcode on the same page to complete this setting.
Value" barcode on page 261. For example, read "1" and "5" for the
Chapter 1 Understanding the Barcode Scanner
Scanner Time-out
after 0~254 sec.
(*10)
Update
41