Laser Mode; Auto Off Mode; Auto Power Off Mode - CipherLab 1662 User Manual

1662/1664 Barcode Scanner

1.7.1 LASER MODE

The scanner will start scanning once the trigger is held down.
The scanning won't stop until (1) a barcode is decoded, (2) the pre-set timeout
expires, or (3) you release the trigger.
Note: Refer to "Scanning Timeout".

1.7.2 AUTO OFF MODE

The scanner will start scanning once the trigger is pressed.
The scanning won't stop until (1) a barcode is decoded, and (2) the pre-set timeout
expires.
Note: Refer to "Scanning Timeout".

1.7.3 AUTO POWER OFF MODE

The scanner will start scanning once the trigger is pressed.
The scanning won't stop until the pre-set timeout expires, and, the pre-set timeout
period re-counts after each successful decoding.
Note: Refer to "Delay between Re-read" and "Scanning Timeout".
38
User Guide
Auto Power Off Mode
*Laser Mode
Auto Off Mode
Enter Setup