Power Level; How To Operate The Scanner - CipherLab 1662 User Manual

1662/1664 Barcode Scanner

1.1.1 POWER LEVEL

Scan the barcode below to get the battery capacity information with each increment of
20 in percentage terms.

1.1.2 HOW TO OPERATE THE SCANNER

Turn on the scanner...
Press the [Power/Delete] key for 2 seconds. The scanner will respond with a long beep (high tone),
and its LED indicator will become solid red and go off.
Turn off the scanner...
Press the [Power/Delete] key for 2 seconds. The scanner will respond with two short beeps (high
tone) and the LED will become solid red. Release the key then. Otherwise, let the scanner turn off
automatically in specific circumstances.
Delete the last collected data when in memory mode ...
Press the [Power/Delete] key. The scanner will respond with two short beeps (high tone) and the
LED will become solid red. Before the LED goes off (within 1 second), press the [Power/Delete] key
again to confirm the deletion.
Enable/Disable the [Delete] key function
Scan the barcode below to enable/disable the [Delete] key. By default, users can press the
[Power/Delete] key to delete data. If the function is disabled, pressing the key to delete data is not
allowed.
22
User Guide
Remaining Battery
Capacity
*Enable
Disable
Enter Setup