Upgrade 3610 Usb Bridge Firmware - CipherLab 1662 User Manual

3) The 3610 will automatically restart itself when upgrading firmware is completed
successfully.
4) Read the "Update" barcode for the scanner to resume its operation (exit the
configuration mode).

UPGRADE 3610 USB BRIDGE FIRMWARE

Note: Upgrade USB bridge firmware only for elder firmware versions. There's no need for
3610 firmware version 2.0 or later to upgrade USB bridge firmware.
1) Read the following barcodes in sequence for 3610 to enter the download mode. The
Communication LED on 3610 will be flashing red to indicate it is ready for
downloading.
2) Run the download utility "ProgLoad.exe" on your computer.
Kernel Program
K3610Bridge_V*.shx
Enter Setup
Download 3610
USB Bridge Firmware
Appendix I
Update
User Program
STD3610Bridge_V*.shx
Update
Firmware Upgrade
247