Data Output Format; Character Substitution; Prefix/Suffix Setting; Code Id Setting - CipherLab SmartScan Manual

DATA OUTPUT FORMAT

5.1 CHARACTER SUBSTITUTION

1) Read the label to enable either character substitution by set.
2) Read the "Hexadecimal
read "3", "0", "2" and "D" for the scanner to replace the character [0] with a dash [-].
3) Read the "Validate" label on the same page to complete this setting.
Serial Command
0309
Serial Command
0311

5.2 PREFIX/SUFFIX SETTING

1) Read the label to apply prefix code or suffix code separately.
2) Read the "Hexadecimal
read "2" and "B" for the scanner to prefix or suffix the character [+].
3) Read the "Validate" label on the same page to complete this setting.
Serial Command
0273

5.3 CODE ID SETTING

5.3.1 CLEAR CODE ID SETTINGS

Serial Command
9960
Value" label on page 58 for the desired character string. For example,
Set 1
Set 3
Value" label on page 58 for the desired character string. For example,
Prefix Code
Clear All Code ID
Settings
Serial Command
0310
Serial Command
0274
Update
Chapter 5
Set 2
Suffix Code
43