Direct Destination Select Key Configuration; Deleting Key Programming - Unify OpenScape Key Module 400 User Manual

70
back
Level shift
Edit direct destination selec- -
Number -
Q
Level shift
Release key
-
Assign telephone function -
Delete key
end
If you have mistyped:
_ Select and confirm. All digits entered are deleted. Re-enter the value and save
the result.
Select the saved procedure with a keystroke.
For procedures with on/off functions, switch the function on with a keystro-
ke and off again with another.
You can also operate the procedure key during a call, which will automati-
cally send the saved figures MFV signals
during procedure saving

Direct destination select key configuration

If you want to set up a direct destination select key on the second level of the
OpenScape Desk Phone CP400 and/or OpenScape Key Module 400, you can
switch to this level beforehand.
If necessary, switch to the second level
_
Hold down the Function keys of the phone or of the OpenScape Key Module
_
400, which is to have a function assigned to it, until the Key Programming Menu
is displayed.
Confirm.
_
_ Confirm
j
Enter the phone number and confirm.
_ Save the setting with the Softkey. The key is programmed.

Deleting key programming

If necessary, switch to the first level
_
_ Hold down the Function keys of the phone or of the OpenScape Key Module
400, which is to have a function assigned to it, until the Key Programming Menu
is displayed.
€
Select "Assign telephone function"
Confirm.
_
€
Select "Delete key"
Confirm. The key's programming is deleted.
_
Confirm to complete the process.
_
page 97. Display notifications

page 158.
