Smdr Output Options - NEC SL1100 Programming Manual

SL1100
Level:
IN
Description
Use Program 35-02 : SMDR Output Options to set the SMDR (Station Message Detail Recording)
Program
output options for each of the eight SMDR ports. Refer to the following chart for a description of each
option, its range and default setting.
35
Input Data
Item
No.
01 Toll Restricted Call
02 PBX Calls
03 Trunk Number or
Name
04 Summary (Daily)
05 Summary (Weekly)
06 Summary (Monthly)
07 Toll Charge Cost
08 Incoming Call
09 Extension Number or
Name
10 All Lines Busy (ALB)
Output
11 Walking Toll Restric-
tion Table Number
12 DID Table Name Out-
put
2-350
Program 35 : SMDR Account Code Setup
SMDR Port Number
Item Input Data
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Name
1 = Number
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Name
1 = Number
0 = Not Displayed
1 = Displayed
0 = Not Output
1 = Output
0 = Not Displayed
1 = Displayed

35-02 : SMDR Output Options

1 ~ 2
Description
SMDR can include or exclude calls
blocked by Toll Restriction.
When the system is behind a PBX, SMDR
can include all calls (1) or just calls dialed
using the PBX trunk access code (0).
Select whether the system should display
the trunk name (0) or the number (1) on
SMDR reports.
If this option is set to 1, Program
35-02-14 must be set to 0.
Set this option to (1) to have the SMDR re-
port provides a daily summary (at midnight
every night).
Set this option to (1) to have the SMDR re-
port provides a weekly summary (every
Saturday at midnight).
Set this option to (1) to have the SMDR re-
port provides a monthly summary (at mid-
night on the last day of the month).
Set this option to (1) have the SMDR re-
port include toll charges.
Enable this option (1) to have the SMDR
report include incoming calls. If you disa-
ble this option (0), incoming calls do not
print.
Set this option (1) to have the SMDR re-
port include extension numbers. Set this
option (0) to have the SMDR report include
extension names.
Determine if the All Lines Busy (ALB) indi-
cation should be displayed.
Determine if the DID table name should be
displayed.
Program 35 : SMDR Account Code Setup
ISSUE 4.0
Default
1
1
1
1
1
1
1
1
1
0
1
0