System Options For Transfer - NEC SL1100 Programming Manual

SL1100
Level:
IN
Description
Use Program 24-02 : System Options for Transfer to define the system options for the Transfer
Program
feature.
24
Input Data
Item
No.
01 Busy Transfer
02 MOH or Ring-
back on Trans-
ferred Calls
03 Delayed Call For-
warding Time
04 Transfer Recall
Time
05 Message Wait
Ring Interval
Time
07 Trunk-to-Trunk
Transfer Release
Warning Tone
08 Delayed Transfer
Time for all De-
partment Groups
2-282
Program 24 : Hold/Transfer Setup
Item Input Data
0 = Disable (No)
1 = Enable (Yes)
0 = Hold Tone
1 = Ring Back Tone
0 ~ 64800 seconds
0 ~ 64800 seconds
0 ~ 64800 seconds
0 ~ 64800 seconds
0 ~ 64800 seconds

24-02 : System Options for Transfer

Description
Use this option to prevent or allow
extensions to Transfer calls to busy
extensions. If disabled, calls trans-
ferred to busy extensions recall im-
mediately.
Use this option to enable or disable
MOH on Transfer. If enabled (0), a
transferred caller hears MOH while
their call rings the destination exten-
sion. If disabled (1), a transferred
caller hears ringback while their call
rings the destination extension.
If activated at an extension, Delayed
Call Forwarding occurs after this
time. This also sets how long a
Transferred call waits at an exten-
sion forwarded to Voice Mail before
routing to the called extension mail-
box.
An unanswered transferred call re-
calls to the extension that initially
transferred it after this time.
For Single Line Telephones (SLTs)
without message waiting lamps, this
is the time between intermittent ring-
ing. If this value is set to 0, the sys-
tem rings once.
Time starts when a trunk begins
talking with another trunk (for exam-
ple : trunk-to-trunk transfer, outgoing
from trunk, Tandem Trunking).
When this time expires, a warning
tone is heard. If Program 24-02-10
is set, the conversation disconnects
after time expires. This time is set
again when the external digit timer
expires. One of the trunks used
must be an analog trunk (or leased
line).
Program 24 : Hold/Transfer Setup
ISSUE 4.0
Default Related
Program
1
1 (V1.5 20-03-02
Changed)
10 20-31-15
20 (V1.5 20-31-16
Changed)
30
1800 14-01-25
20-28-01
20-28-02
20-28-03
24-02-10
10 11-11-28
11-11-29
15-07-59