Ip Telephone Terminal Basic Data Setup - NEC SL1100 Programming Manual

SL1100
Level:
IN
Description
Use Program 15-05 : IP Telephone Terminal Basic Data Setup to set up the basic settings for an IP
Program
telephone.
15
Input Data
Item
No.
01 Terminal Type
02 IP Phone Fixed
Port Assignment
04 Nickname
07 Using IP Address Read Only:
09 Call procedure
port
15 CODEC Type
16 Authentication
Password
2-136
Program 15 : Extension, Basic Setup

15-05 : IP Telephone Terminal Basic Data Setup

Extension Number
Item Input Data
Read Only:
0 = NGT
1 = H.323
2 = SIP
3 = MEGACO
4 = SIP-MLT
MAC address
00-00-00-00-00-00 ~
FF-FF-FF-FF-FF-FF
Up to 48 characters
0.0.0.0 ~
255.255.255.255
Read Only:
0 ~ 65535
1 = Type 1
2 = Type 2
3 = Type 3
4 = Type 4
5 = Type 5
Up to 24 characters
Maximum eight digits
Description
MAC Address of registered SIP MLT
phone is stored and/or can input the
MAC address of an SIP MLT phone
so when it comes online it is provi-
ded with the extension in which the
MAC address matches.
Nickname section on Invite mes-
sage.
Example :
Extension 100 has a Nickname set
to PAUL.
Extension 101 has command
15-05-17 set to Nickname.
The inbound call to extension 101,
from 100, shows PAUL.
Nickname must be unique in the
system.
Assign the CODEC Type of the SIP
MLT.
Assign the authentication password
for SIP single line telephones.
Program 15 : Extension, Basic Setup
ISSUE 4.0
Default Related
Program
-
00-00-00- 15-05-01
00-00-00
No Setting 15-05-17
- 15-05-01
- 15-05-01
1 84-24
84-11
15-05-01
No Setting 15-05-01