Program 16 : Department Group Setup; Department Group Basic Data Setup - NEC SL1100 Programming Manual

SL1100
Level:
IN
Description
Use Program 16-01 : Department Group Basic Data Setup to set the function mode for each
Program
department group. There are 32 available Department Groups.
16
Input Data
Item
No.
01 Department
Name
02 Department Call-
ing Cycle
03 Department
Routing when
Busy (Auto Step
Call)
04 Hunting Mode
05 Extension Group
All Ring Mode
Operation
06 STG Withdraw
Mode
07 Call Recall Re-
striction for STG
2-162

Program 16 : Department Group Setup

16-01 : Department Group Basic Data Setup

Department Group Number
Item Input Data
Maximum 12 charac-
ters
0 = Normal Routing
(Priority)
1 = Easy - UCD Rout-
ing (Circular)
0 = Normal (Intercom
caller hears busy tone.)
1 = Circular (Intercom
caller routes to an idle
group member.)
0 = Last extension is
called and hunting is
stopped
1 = Circular
0 = Manual (Ring the
extensions one at a
time when the service
code are pressed.)
1 = Automatic (Ring all
extensions.)
0 = Disabled (Call will
camp on to the group.)
1 = Automatic (Call fol-
lows PRG 22-11-11.)
0 = Disabled (Call will
recall.)
1 = Enabled (Call will
not recall.)
Description
This program is used to assign a
name to the department group.
Use this option to set the call routing
for Department Calling. Routing can
be either circular (cycles to all
phones in group) or priority (cycles
to highest priority extensions first).
Set this option to set how the sys-
tem routes an Intercom call to a
busy Department Group member.
Intercom callers to the extension
can either hear busy or route to the
first available department number.
This only occurs for calls to the ex-
tension directly, not the department
number assigned in Program 11-07.
Use this option to set the action tak-
en when a call reaches the last ex-
tension in the Department Group (0
= hunting stopped, 1 = hunting re-
peats with circular routing through
the Department Group).
Determine whether calls ringing a
Department Group should ring all
extensions in the group simultane-
ously automatically or manually
when using the service code defined
in Program 11-12-09.
When set to (1) Automatic, only
ICM Calls and DID Calls will
ring all the stations in the De-
partment Group.
Determine whether or not an unan-
swered call transferred to a Depart-
ment Group should recall the exten-
sion from which it was transferred.
Program 16 : Department Group Setup
ISSUE 4.0
1 ~ 32
Default Related
Program
No Setting 11-07
0 16-02
0 16-02
0
0 11-16-10
0
0