NEC SL1100 Programming Manual page 371

ISSUE 4.0
Item Item
No.
13 CLI Output When DID
to Trunk
14 Date
15 CLI/DID Number
Switching
16 Trunk Name or Re-
ceived Dialed Number
17 Print Account Code
or Caller Name of In-
coming Call
18 Print Mode for Caller
Name of Incoming
Call
19 Dialed Number Out-
put Format
20 External Information
CFW Mode
21 S-Point Terminal
Number
22 Security Auto Dialing
23 Watch Auto Dialing
25 Call Waiting (V4.0
Added)
Conditions
None
Programming Manual
Input Data
0 = Not Displayed Determine if the CLI output should be dis-
1 = Displayed played for DID.
0 = Not Displayed Determine whether or not the date should
1 = Displayed be displayed on SMDR reports.
0 = CLI (CLIP) Determine whether or not the CLI/DID
1 = DID Calling Number Number Switching should be displayed.
2 = Calling Party Name
0 = Trunk Port Name Determine how the SMDR should print in-
1 = Received Dialed coming calls on ANI/DNIS or DID trunks. If
Number set to (1), ANI/DNIS trunks can print DNIS
2 = Both digits. If set to (0) trunk names are printed
instead.
0 = ACC Determine if SMDR should print Account
1 = CNAME Code or Caller Name of Incoming Call.
0 = Normal Determine how SMDR should print Caller
1 = Line Feed Name of Incoming Call.
0 = Display from the first Determine if the dialed number should dis-
digit play from the first digits or from the last
1 = Display from the last digits. This option is only available for out-
digit going calls.
0 = Transfer Information Determine which information is displayed
1 = Incoming Information in the "STATION" area for a transferred
call when the extension has Call Forward
set with an Abbreviated Dial number as
the destination. Selecting "0" (Transfer In-
fo) will display the extension number which
called the extension with external Call For-
ward set. Selecting "1" (Incoming Info) will
display the extension number which has
the external Call Forward set.
This option only applies when Call For-
ward is set using a service code (Pro-
grams 11-11-01 ~ 11-11-07) and the desti-
nation uses an Abbreviated Dial bin. It
does not include Off-Premise or Centrex
transfers.
0 = MSN Number
1 = Extension Number
0 = No Output Emergency call from Watch Mode. Define
1 = Output SMDR output on/off. Output is SAD (Se-
curity auto dialing).
0 = No Output Emergency call from Remote Inspection.
1 = Output Define SMDR output on/off. Output is
WAD (Watch auto dialing )
0 = No Output Define Call Waiting output on/off
1 = Output
Description
This option must be set to 0 if the trunk
name is set to be displayed in Program
35-02-03.
SL1100
Default
0
0
0
Program
0
35
0
0
0
0
0
1
1
1
2-351