Vrs Delayed Message For Department Group - NEC SL1100 Programming Manual

ISSUE 4.0

22-15 : VRS Delayed Message for Department Group

Level:
IN
Description
Use Program 22-15 : VRS Delayed Message for Department Group to define for each Department
(Extension) Group the timers, VRS message number and tone kind for VRS Delayed Message. There
are 32 available Department Groups.
Input Data
Extension Group Number
Item Item
No.
01 st
1 Delayed Message
Start Time
02
st
1 Delayed Message
Number
03
st
1 Delayed Message
Sending Count
04
nd
2 Delayed Message
Number
05
nd
2 Delayed Message
Sending Count
06 Tone Kind at Mes-
sage Interval
07 Disconnect Time Af-
ter the End of VRS
Delayed Message
Conditions
None
Feature Cross Reference
• Department Group
Programming Manual
Program 22 : Incoming Call Setup
Input Data
0 ~ 64800 seconds Time before the VRS Delay Message is
played for Department Group.
0 ~ 101 VRS message that is used for the 1st De-
0 = No Message layed Message.
101 = Fixed Message
0~255 (time) This is the number of times the 1st Delay
Message is played. If set to 0, the 1st De-
lay Message is not played.
0 ~ 101 VRS message that is used for the 2nd De-
0 = No Message layed Message.
101 = Fixed Message
0 ~ 255 (time) This is the number of times the 2nd Delay
Message is played. If set to 0, the 2nd De-
lay Message is not played.
0 = Ring Back Tone What is heard between the Delay Mes-
1 = MOH Tone sage.
2 = BGM Source
0 ~ 64800 seconds Time, after all 2nd Delay Messages are
0 = No Disconnect played, before the caller is disconnected.
01 ~ 32
Description
SL1100
Program
22
Default
0
0
0
0
0
0
60
2-273