Copy Program By Port Number - NEC SL1100 Programming Manual

ISSUE 4.0
Level:
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Use Program 92-03 : Copy Program by Port Number to copy extension and the data of each
outside line.
Input Data
Program Number
Item No. Item
01 Source Number
02 Destination Number (From)
03 Destination Number (To)
Refer to Program 92-01 Copy Program on page 2-609
Conditions
None
Feature Cross Reference
None
Programming Manual
Program 92 : Copy Program

92-03 : Copy Program by Port Number

Input Data
• For Trunk Base : Trunk Port Number
001 ~ 084
• For Trunk Group Base : Trunk Group
Number 01 ~ 25
• For Extension Number : 001 ~ 128
(V3.5 Changed)
Including Virtual Extension : 01 ~ 178
(V3.5 Changed)
• For Department Group Base : De-
partment Group Number 01 ~ 32
• For DSS : (DSS Console Number 01
~ 12
for program that can be copied.
SL1100
XX-XX
Description
Enter the port number from where
the data is to be copied.
Enter the first port number to
where the information is to be
copied
Enter the last port number to
where the information is to be
copied. If the information is to be
copied only to one port, enter the
information entered in the Desti-
nation Number (From) entry.
2-613
Program
92