Dial Analysis Table For Ars - NEC SL1100 Programming Manual

SL1100
Level:
IN
Description
Use Program 26-02 : Dial Analysis Table for ARS to set pre-transaction tables for selecting
Program
Automatic Route Selection (ARS/F-Route).
• Service Type 1 (Route to Trunk Group Number) - The number routes to a trunk group.
26
• Service Type 2 (F-Route Selected) - The number is controlled by the F-Route table.
Input Data
Item
No.
01 Dial
02 ARS Service Type
03 Additional Data/Service
Number
04 ARS Class of Service
05 Dial Treatment for ARS
07 Network Specified Parameter
Table
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS/F-Route)
2-306
Dial Analysis Table Number
Item
Maximum of 16 digits (0 ~ 9,
0 = No Service (Call Restricted)
1 = Route to Trunk Group
2 = Select F-Route Access
If Service Type 1 (in 26-02) : Select Trunk Group
Number
0 ~ 25 (Trunk Group Number 0 = No Route)
101 ~ 104 (Networking ID) (V1.5 Added)
If Service Type 2 (in 26-02) :
F-Route Time Schedule Not Used = 0 ~ 100
(F-Route Table Number).
Refer to
page
F-Route Time Schedule Used = 0 ~ 100
(F-Route Selection Number).
Refer to
for Time Schedule on page
0 ~ 16
0 = No ARS Class (Call Restricted)
0 ~ 15
0 ~ 16
Program 26 : ARS Service

26-02 : Dial Analysis Table for ARS

Input Data
* , #, @)
Program 44-05 : ARS/F-Route Table on
2-394.
Program 44-04 : ARS/F-Route Selection
2-393.
ISSUE 4.0
1 ~ 400
Default Related
Program
No Setting
0
0 44-04
44-05
0
0
0 26-12
Program 26 : ARS Service