Account Code Setup - NEC SL1100 Programming Manual

ISSUE 4.0
Program 35 : SMDR Account Code Setup
Level:
IN
Description
Use Program 35-05 : Account Code Setup to set various Account Code options for an extension
Class of Service. Assign a Class of Service to extensions in Program 20-06.
Input Data
Class of Service Number
Item Item
No.
01 Account Code Mode
02 Forced Account Code
Toll Call Setup
03 Account Codes for In-
coming Calls
04 Hiding Account Co-
des
Conditions
None
Programming Manual

35-05 : Account Code Setup

Input Data
0 = Account Codes Disa- Use this option to select the Account Code
bled Mode (0 ~ 3).
1 = Account Codes Op-
tional (This is for the ac-
count code entry fea-
ture.)
2 = Account Code Re-
quired Not Verified
(Forced Account Codes
enabled, no verification
with the system re-
quired)
3 = Account Code Re-
quired and Verified
(Forced Account Codes
enabled, verification with
PRG 35-06-01 required)
0 = Account Codes for Use this option enable Account Codes for
ALL calls all calls or just toll calls (for mode 2 or 3 in
1 = Account Codes for Item 01 above).
TOLL calls
0 = Disabled (User can- Use this option to allow users to enter Ac-
not enter an account count Codes for incoming calls. If disabled,
code.) any codes entered dial out on the connec-
1 = Enabled (User can ted trunk.
enter an account code
while on an incoming
call.)
0 = Account Codes dis- Use this option to either hide or show the
played Account codes on a telephone display.
1 = Account Codes not
displayed
01 ~ 15
Description
SL1100
Program
35
Default
0
0
0
0
2-355