Vrs Delayed Message For Irg - NEC SL1100 Programming Manual

SL1100
Level:
IN
Description
Use Program 22-14 : VRS Delayed Message for IRG (Incoming Group Ring) to define for each
Program
incoming ring group the timers, VRS message number and type of tone for VRS Waiting Message.
22
Input Data
Item
No.
01 st
1
Start Time
02
st
1
Number
03
st
1
Sending Count
04
nd
2
Number
05
nd
2
Sending Count
06 Tone Kind at Mes-
sage Interval
07 Disconnect Time Af-
ter the End of VRS
Delayed Message
Conditions
None
Feature Cross Reference
None
2-272
Program 22 : Incoming Call Setup
Incoming Ring Group Number
Item Input Data
0 ~ 64800 seconds
Delayed Message
0 ~ 101
Delayed Message
0 = No Message
101 = Fixed Message
0 ~ 255 (time)
Delayed Message
0 ~ 101
Delayed Message
0 = No Message
101 = Fixed Message
0 ~ 255 (time)
Delayed Message
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
0 ~ 64800 seconds
0 = No Disconnect

22-14 : VRS Delayed Message for IRG

Time before the VRS Delay Message is
played for IRG.
VRS message that is used for the 1st De-
layed Message.
This is the number of times the 1st Delay
Message is played. If set to 0, the 1st De-
lay Message is not played.
VRS message that is used for the 2nd De-
layed Message.
This is the number of times the 2nd Delay
Message is played. If set to 0, the 2nd De-
lay Message is not played.
What is heard between the Delay Mes-
sage.
Time, after all 2nd Delay Messages are
played, before the caller is disconnected.
1 ~ 25
Description
Program 22 : Incoming Call Setup
ISSUE 4.0
Default
0
0
0
0
0
0
60