Firmware Update Time Setting - NEC SL1100 Programming Manual

ISSUE 4.0
Level:
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Use Program 90-36 : Firmware Update Time Setting to define the data for the firmware update
feature. This data is available to set from the PC Programming FW update feature.
The following firmware is available to update with this feature:
• main.bin
• Dspdbu.bin
• dsp.bin
• intradbu.bin is not supported
Input Data
Item Item
No.
01 Firmware Update Sched-
ule Time
02 Update mode
03 Update Report
Sample Report
Result
Update Success
Update Fail
Update Fail
Update Fail
Programming Manual
Program 90 : Maintenance Program

90-36 : Firmware Update Time Setting

Input Data
Read Only:
Year : 0 ~ 99
Month : 0 ~ 12
Day : 00 ~ 31
Hour : 00 ~ 23
Minute : 00 ~ 59
Read Only:
0 = Non Active
1 = Activated
Read Only:
Maximum 256 charac-
ters
Update Success
Update is fail. Since 'A' drive is not available.
Update is fail. Since main up is not exist on A drive.
Update is fail. Since Time is expired.
Default Description
0 Set the time to update the firmware us-
ing a compact flash card.
Time registration fails if an expired
time is registered.
0 Activate the Firmware Update feature.
If this setting is 1, new firmware on the
compact flash card updates according
to the setting at 90-36-01.
- Output a report when the update is
executed and saves one copy on the
system. If a new update occurs, the
new report overwrites the old report.
Refer to the Sample Report on
page 2-581 shown.
Report Display
SL1100
Program
90
2-581