Dhcp Client Setting - NEC SL1100 Programming Manual

SL1100
Level:
IN
Description
Use Program 10-63 : DHCP Client Setting to set the data of DHCP Client.
Program
10 Input Data
Item
No.
01 DHCP Client Mode
Conditions
None
Feature Cross Reference
None
2-56
Program 10 : System Configuration Setup
Item Input Data
0 = Disabled
1 = Enabled

10-63 : DHCP Client Setting

Description
If you are using IP phones/trunks it is rec-
ommended to not use the DHCP client
function, a static IP address would be pre-
ferred. If you are going to still use the
DHCP client function then the DHCP serv-
er should be setup so that the same IP ad-
dress is always provided to the system.
When changing this program a system
reset is required.
Program 10 : System Configuration Setup
ISSUE 4.0
Default
1