System Alarm Setup; Table 2-18 Description Of Alarm - NEC SL1100 Programming Manual

ISSUE 4.0
Level:
IN
Description
Use Program 90-10 : System Alarm Setup to assign a status to system alarms. You can designate
an alarm as Major or Minor. This program also assigns whether or not the alarm information is
reported to the pre-defined destination.
Input Data
Alarm Number
Item Item
No.
01 Alarm Type
02 Report
Alarm Re-
Type Name
No. port
1 2 0 PKG Initi-
alize Er-
ror.
2 2 0 PKG
Mounting
Error
Programming Manual
Program 90 : Maintenance Program
0 = Not Set
1 = Major Alarm
2 = Minor Alarm
0 = Not Report (No autodial)
1 = Report (autodial)

Table 2-18 Description of Alarm

Content of
Alarm
1. The PKG 1. PKG not inser-
failed to ini- ted firmly.
tialize. 2. PKG was re-
2. The PKG moved, but
did not start not reinserted
normally. firmly.
3. Old PKG data
still reported
due to no initi-
alization.
The unit did not 1. The package
step on a regu- is not com-
lar procedure pletely inser-
and it was ted.
pulled out. 2. The package
Or, it is not nor- is out of order.
mally inserted.

90-10 : System Alarm Setup

001 ~ 100
Input Data
Cause Action
1. Insert PKG
firmly.
2. Insert PKG
firmly.
3. Delete slot in-
formation in
Program
90-05 and in-
sert the PKG
again.
1. Please insert
the package
firmly.
2. Please try
again after ini-
tializing the
system data
once when
LED doesn't
blink normally.
3. Exchange
packages.
SL1100
Default
-
-
Alarm
Recovery
Status
During initiali- ERR
zation, the REC
PKG is rec-
ognized.
When unit is ERR
reconfirmed, REC
the error is
recovered.
2-539
Program
90