NEC SL1100 Programming Manual page 190

SL1100
Item
No.
07 Time and Date Dis-
play Mode
08 LCD Display Hold-
ing Time
09 Disconnect Supervi-
Program
sion
20
10 Time Before Shifting
to Power-Saving
Mode
11 Handsfree Micro-
phone Control
12 Forced Intercom
Ring (ICM Call Type)
15 Caller ID Display
Mode
18 Dialing Record Dis-
play Time
2-170
Item
1 ~ 8
Type 1 = (12 hour) 10 MAR TUE 3 : 15 PM
Type 2 = (12 hour) 3 : 15 PM MAR 10 TUE
Type 3 = (12 hour) 3-10 TUE 3 : 15 PM
Type 4 = (12 hour) 3 : 15 PM TUE 10 MAR
Type 5 = (24 hour) 10 MAR TUE 15 : 15
Type 6 = (24 hour) 15 : 15 MAR 10 TUE
Type 7 = (24 hour) 3-10 TUE 15 : 15
Type 8 = (24 hour) 15 : 15 TUE 10 MAR
0 ~ 64800 seconds
0 = Disable (Off)
1 = Enable (On)
0 = No Shift
1 = 1 minute
2 = 2 minutes
3 = 4 minutes
4 = 8 minutes
5 = 16 minutes
6 = 32 minutes
7 = 64 minutes
0 = Off
1 = On
0 = Disable (Voice)
1 = Enable (Signal)
0 = Name and Number (Both)
1 = Name
2 = Number
0 ~ 64800 seconds
Input Data
Set how the
Time and Date
appear on dis-
play tele-
phones. There
are eight dis-
play modes.
Use this option
to enable or
disable discon-
nect supervi-
sion for the
system trunks.
Use this option
to control the
setting for Mul-
tiline Terminal
Handsfree mi-
crophone after
being discon-
nected and re-
connected. If
set to 0, the
microphone is
always off
when the ter-
minal is recon-
nected. If set to
1, the micro-
phone remains
in the same
state it was in
when the ter-
minal is recon-
nected.
Use this option
to enable or
disable Forced
Intercom Ring-
ing. If enabled,
incoming Inter-
com calls nor-
mally ring. If
disabled, Inter-
com calls
voice-an-
nounce.
Program 20 : System Option Setup
ISSUE 4.0
Description Default Related
Program
3
5
1
0 15-02-18
1
1
0
30