Service Code Setup (For Service Access) - NEC SL1100 Programming Manual

ISSUE 4.0

11-12 : Service Code Setup (for Service Access)

Level:
IN
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the Service Codes
which are used for service access. You can customize additional Service Codes in Programs 11-10,
11-11, and 11-14 through 11-16.
The following chart shows:
• The number of each code (01 ~ 64).
• The function of the Service Code.
• The type of telephones that can use the Service Code.
• The default entry. For example, dialing (Item 05) cancels a previously set Camp- On.
• Programs that may be affected with the changing the code.
Input Data
Item Item
No.
01 Bypass Call
02 Conference
03 Override (Off-
Hook Signaling)
04 Set Camp-On
05 Cancel Camp-On 0~9,
06 Switching of
Voice Call and
Signal Call
07 Step Call
08 Barge-In
09 Change to STG
(Department
Group) All Ring
10 Station Speed Di-
aling
Programming Manual
Program 11 : System Numbering
Input Data
*
0~9, , # Maximum of
8 digit Activating Call Forwarding/Do Not
Disturb Override. This code is avail-
able only if you disable the voice
mail Single Digit dialing code in Pro-
*
0~9, , # Maximum of
8 digit
0~9, * , # Maximum of
8 digit
0~9, * , # Maximum of
8 digit
*
, # Maximum of
8 digit
0~9, * , # Maximum of
8 digit
0~9, * , # Maximum of
8 digit
0~9, * , # Maximum of
8 digit
0~9, * , # Maximum of
8 digit
0~9, * , # Maximum of Assign the service code used for ac-
8 digit cessing common speed dialing (sys-
The service code assigned must be
within your valid numbering plan in
Description
Terminal: MLT, SLT
gram 11-16-09.
Terminal: MLT, SLT
Terminal: MLT, SLT
Terminal: MLT, SLT
Terminal: MLT, SLT
Terminal: MLT, SLT
Terminal: MLT, SLT
Terminal: MLT, SLT
Terminal: MLT, SLT
tem speed dialing) bins.
PRG.
SL1100
Default Related
Program
707
#1
709
750
770
712
708
710
No Setting 16-02
#2
2-77
Program
11