Program 35 : Smdr Account Code Setup; Smdr Options - NEC SL1100 Programming Manual

SL1100
Level:
IN
Description
Use Program 35-01 : SMDR Options to set the SMDR (Station Message Detail Recording) options
Program
for each of the eight SMDR ports. Refer to the following chart for a description of each option, its
range and default setting.
35
Input Data
Item
No.
01 Output Port Type
03 Header Language
04 Omit Digits
05 Minimum Digits
06 Minimum Call Dura-
tion
07 Minimum Ring Time
(For Incoming Calls)
08 Format Selection
Conditions
None
2-348

Program 35 : SMDR Account Code Setup

SMDR Port Number
Item Input Data
0 = No Setting (SMDR
disabled)
3 = LAN (SMDR enabled
and sent out of the LAN
port.)
0 = English
1 = German
2 = French
3 = Italian
4 = Spanish
0 ~ 24 (0 = Not applied)
0 ~ 24 (0 = Not applied)
0 ~ 65535 seconds (0 =
All)
0 ~ 65535 seconds (0 =
All)
0 = Format1 Type (North
America)
1 = Format2 Type (Over-
seas)

35-01 : SMDR Options

1 ~ 2
Description
This option specifies the type of connec-
tion used for SMDR. The baud rate for the
COM port should be set in Program
10-21-02 or 15-02-19.
Specify the language in which the SMDR
header should be printed.
The number of digits entered in this option
does not print on the SMDR report. For ex-
ample, if the entry is 10, the first 10 digits a
user dials do not appear on the SMDR re-
port.
Outgoing calls must be at least this num-
ber of digits for inclusion in the SMDR re-
port.
The duration of the call must be at least
this time to be included on the SMDR re-
port.
A call must ring for at least this time to be
included on the SMDR report.
Program 35 : SMDR Account Code Setup
ISSUE 4.0
Default
SMDR port1 : 3
SMDR port2 : 0
0
0
0
0
0
0