D Memory Keyer Send Screen - Icom IC-756PROIII Instruction Manual

4
RECEIVE AND TRANSMIT
D D Memory keyer send screen
Pre-set characters can be sent using the keyer send
menu. Contents of the memory keyer are set using
the edit menu.
[TRANSMIT] [(F-1)M1]–[(F-4)M4]
[CW/RTTY]
AGC AGC
MID MID
M 1 M 1
M 2 M 2
BK-IN BK-IN
OFF OFF
M 3 M 3
1/4 1/4
M 4 M 4
OFF OFF
M1 M1 M2 M2
39
[EXIT/SET]
M E M O R Y K E Y E R M E M O RY K EY ER
C Q T E S T C Q T E S T C Q C Q T E S T T E S T D E D E I C O M I C O M I C O M I C O M
T E S T T E S T
U R U R 5 N N 5 N N 0 0 1 0 0 1 B K B K
C F M C F M T U T U
Q R Z ? Q R Z ?
M3 M3 M4 M4 -1 -1
• Transmitting
q Push [EXIT/SET] several times, if necessary.
w Push [CW/RTTY] to select CW mode.
e Push [(F-3)KEYER] to select the memory keyer
screen.
r Push [TRANSMIT] to set the transceiver to trans-
mit, or set the break-in function ON (p.67).
t Push [(F-1)M1] – [(F-4)M4] momentarily to trans-
mit the contents one time; push these keys for 1
sec. to transmit the contents repeatedly.
• "M1"–"M4" are highlighted while transmitting.
• " " appears while transmitting repeatedly.
• Set the repeat interval of the memory keyer to 1–60 sec.
(1 sec. steps). See p. 42 for keyer set mode.
• To count down the contact number, push [
For your information
When an external keypad is connected to the pin 3
and pin 7 of the [MIC] connecter, the programmed
contents, M1–M4, can be transmitted without open-
ing the memory keyer screen.
See page 104 for details.
y Push [EXIT/SET] twice to exit the memory keyer
screen.
(F-5)
–1].