2-1-7 Eject/Feedshift section
The paper eject/feedshift section consists of the conveying path which sends the paper that has passed the
fuser section to the top tray, duplex conveying section or job separator.
5
4
11
12
1. Middle pulley
2. Eject roller
3. Eject pulley
4. Eject roller B
5. Eject pulley B
6. Upper duplex roller
7. Duplex pulley
14
3
2
1
Figure 2-1-21 Eject/Feed shift section
2-1-21
13
9
8
8. Lower duplex roller
9. Lower change guide
10. Upper change guide
11. Eject full sensor (EFS)
12. Actuator (eject full sensor)
13. Switchback sensor (SBS)
14. Actuator (switchback sensor)
2LL/2LJ/2LH-2
10
6
7