Eject/Feedshift Section - Kyocera KM-C2525E Service Manual

2JL/2JJ/2JG/2JD
2-1-7

Eject/feedshift section

(1) Eject/feedshift section
The eject/feedshift sections switch the paper path based on the copy mode and eject paper or convey the paper to the
duplex section. For duplex copy mode, the paper for which copying on the rear side has been completed is conveyed to
the duplex section by the feedshift section operation. After the conveyed paper is inverted, it is fed again for front side
copying.
(1) Exit upper frame
(2) Middle pulley
(3) Middle pulley
(4) Exit lower frame
(5) Exit pulley
(6) Exit roller
PPR FULL
YC27-A5
EXT1 JAM
YC27-B10
EPWB
EXIT MOT DR
YC27-B4
EXIT MOT CLK
YC27-B5
EXIT MOT DIR
YC27-B6
EXIT MOT GAIN
YC27-B8
EXIT MOT LOCK
YC27-B7
EXT2 JAM
YC27-B11
2-1-16
Figure 2-1-21 Eject/feedshift section
(7) Change R guide
(8) Paper full detection
sensor (PFS)
(9) Feedshift switch (FSSW)
(10) Eject switch (ESW)
(11) Fuser exit pulley
EM
Figure 2-1-22 Eject/feedshift section block diagram
(12) Exit L guide
(13) FD roller
(14) Change L guide
(15) Output tray
Eject/feedshift section
FSSW
ESW
PFS