Manufacture Technology GEFXL2-CSW28KX User Manual page 96

Parameter description:
Snooping Enabled:

Enable the Global IGMP Snooping.
Unregistered IPMCv4 Flooding enabled :

Enable unregistered IPMCv4 traffic flooding.
IGMP SSM Range :

SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers
run the SSM service model for the groups in the address range. Format: (IP
address/ sub mask)
Proxy Enabled :

Enable IGMP Proxy. This feature can be used to avoid forwarding unnecessary
join and leave messages to the router side.
Port :

It shows the physical Port index of switch.
Router Port :

Specify which ports act as router ports. A router port is a port on the Ethernet
switch that leads towards the Layer 3 multicast device or IGMP querier.
If an aggregation member port is selected as a router port, the whole
aggregation will act as a router port.
Fast Leave :

Enable the fast leave on the port.
Throttling :

Enable to limit the number of multicast groups to which a switch port can
belong.
Buttons

Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
86 Publication date: March, 2012
Revision A1