3-1.6 Sfp Information - Manufacture Technology GEFXL2-CSW28KX User Manual

3-1.6 SFP Information

The section describes that switch could display the SFP module detail information which you
connect it to the switch. The information includes: Connector type, Fiber type, wavelength,
banud rate and Vendor OUI etc.
Web Interface
To Display the SFP information in the web interface:
1. Click Configuration, Port, then SFP Information
2. To display the SFP Information.
Figure 3-1.6: The SFP Information Overview
Parameter description:
Connector Type:

Display the connector type, for instance, UTP, SC, ST, LC and so on.
Fiber Type:

Display the fiber mode, for instance, Multi-Mode, Single-Mode.
Tx Central Wavelength:

Display the fiber optical transmitting central wavelength, for instance, 850nm,
1310nm, 1550nm and so on.
Baud Rate:

Display the maximum baud rate of the fiber module supported, for instance,
10M, 100M, 1G and so on.
Vendor OUI:

Display the Manufacturer's OUI code which is assigned by IEEE.
Vendor Name:

Display the company name of the module manufacturer.
Vendor P/N:

45
Publication date: March, 2012
Revision A1