Acl; 3-2.1 Ports - Manufacture Technology GEFXL2-CSW28KX User Manual

3-2 ACL

The GEFXL2-CSW28KX switch access control list (ACL) is probably the most commonly
used object in the IOS. It is used for packet filtering but also for selecting types of traffic to be
analyzed, forwarded, or influenced in some way.The ACLs are divided into EtherTypes. IPv4,
ARP protocol, MAC and VLAN parameters etc. Here we will just go over the standard and
extended access lists for TCP/IP. As you create ACEs for ingress classification, you can
assign a policy for each port, the policy number is 1-8, however, each policy can be applied to
any port. This makes it very easy to determine what type of ACL policy you will be working
with.

3-2.1 Ports

The section describes how to configure the ACL parameters (ACE) of the each switch port.
These parameters will affect frames received on a port unless the frame matches a specific
ACE
Web Interface
To configure the ACL Ports Configuration in the web interface:
1. Click Configuration, ACL, then Ports
2. To scroll the specific parameter value to select the correct value for port
ACL setting.
3. Click the save to save the setting
4. If you want to cancel the setting then you need to click the reset button. It
will revert to previously saved values.
5. After you configure complete then you could see the Counter of the port .
then you could click refresh to update the counter or Clear the information.
Figure 3-2.1: The ACL Ports Configuration
Parameter description:
Port :

The logical port for the settings contained in the same row.
Policy ID :

49
Publication date: March, 2012
Revision A1