Firmware; 5-2.1 Firmware Upgrade - Manufacture Technology GEFXL2-CSW28KX User Manual

5-2 Firmware

This section describes how to upgrade Firmware. The Switch can be enhanced with more
value-added functions by installing firmware upgrades.

5-2.1 Firmware Upgrade

This page facilitates an update of the firmware controlling the Switch.
Web Interface
To configure a Firmware Upgrade Configuration in the web interface:
1. Chick Browser to select firmware in you device.
2. Click Upload.
Figure 5-2.1: The Firmware update
Parameter description:
Browse :

Click the "Browse..." button to search the Firmware URL and filename.
Upload:

Click the "Upload" button then the switch will start to upload the firmware from firmware
stored location PC or Server.
This page facilitates an update of the firmware
N :
OTE
controlling the stack. switch. Uploading software will update
all managed switches in the stack to the location of a
software image and click. After the software image is
uploaded, a page announces that the firmware update is
initiated. After about a minute, the firmware is updated and
all managed switches in the stack restart. the switch
restarts.
While the firmware is being updated, Web access
W :
ARNING
appears to be defunct. The front LED flashes Green/Off with
a frequency of 10 Hz while the firmware update is in
progress. Do not restart or power off the device at this time
or the switch may fail to function afterwards.
273
Publication date: March, 2012
Revision A1