Manufacture Technology GEFXL2-CSW28KX User Manual page 28

Parameter description:
DHCP Client :

Enable the DHCP client by checking this box. If DHCP fails and the configured
IP address is zero, DHCP will retry. If DHCP fails and the configured IP address
is non-zero, DHCP will stop and the configured IP settings will be used. The
DHCP client will announce the configured System Name as hostname to provide
DNS lookup.
IP Address :

Provide the IP address of this switch in dotted decimal notation.
IP Mask :

Provide the IP mask of this switch dotted decimal notation.
IP Router :

Provide the IP address of the router in dotted decimal notation.
SNTP Server :

Provide the IP address of the SNTP Server in dotted decimal notation.
DNS Server :

Provide the IP address of the DNS Server in dotted decimal notation.
VLAN ID :

Provide the managed VLAN ID. The allowed range is 1 to 4095.
DNS Proxy :

When DNS proxy is enabled, DUT will relay DNS requests to the current
configured DNS server on DUT, and reply as a DNS resolver to the client device
on the network.
18 Publication date: March, 2012
Revision A1