Manufacture Technology GEFXL2-CSW28KX User Manual page 165


GARP Applicant
Timer Values :

To set the GARP join timer, leave timer and .leave all timers, units is Micro-second.
Three different timers can be configured on this page:
Join Timer :The default value for Join timer is 200ms.
Leave Timer : The range of values for Leave Time is 600-1000ms. The default value
Leave All Timer : The default value for Leave All Timer is 10000ms
Application :

Currently only supported application is GVRP.
Attribute Type :

Currently only supported Attribute Type is VLAN.
GARP Applicant

This configuration is used to configure the Applicant state machine behaviour for GARP on
a perticular port locally.

normal-participant: In this mode the Applicant state machine will operate normally in
GARP protocol exchanges.

non-participant: In this mode the Applicant state machine will not participate in the
protocol operation.
The default configuration is normal participant.
Buttons:

Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
for Leave Timer is 600ms.
155
Publication date: March, 2012
Revision A1