Manufacture Technology GEFXL2-CSW28KX User Manual page 177

QoS class :

Controls the default QoS class, i.e., the QoS class for frames not classified in any other
way. There is a one to one mapping between QoS class, queue and priority. A QoS class of
0 (zero) has the lowest priority.
DP level :

Controls the default DP level, i.e., the DP level for frames not classified in any other way.
PCP :

Controls the default PCP for untagged frames.
DEI :

Controls the default DEI for untagged frames.
Tag Class. :

Shows the classification mode for tagged frames on this port.
Disabled: Use default QoS class and DP level for tagged frames.
Enabled: Use mapped versions of PCP and DEI for tagged frames.
Click on the mode in order to configure the mode and/or mapping.
DSCP Based :

Click to Enable DSCP Based QoS Ingress Port Classification.
Buttons:

Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
167
Publication date: March, 2012
Revision A1