3-22.2 Event Config - Manufacture Technology GEFXL2-CSW28KX User Manual

3-22.2 Event Config

This chapter allows the user to inspect the current Link OAM Event configurations, and
change them as well. It allows you to set what kind event to trigger 802.3ah OAM monitor and
management function.
Web Interface
To configure the Link event configuration in the web interface:
1. Click Configuration, 802.3ah OAM then Event config.
2. Evoke auto-refresh to update the Link Event data.
3. Set all parameters on Link event field.
4. Click the save to save the setting
5. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
.
Figure 3-22.2: The Link Event Configuration
Parameter description:
Port Members :

The switch port number and index for port configuration IEEE 802.3ah OAM event
configuration.
Event Name :

Name of the Link Event which is being configured on the switch and it will be monitored by
switch.
Error Frame Event:
The Errored Frame Event counts the number of errored frames detected during the
specified period. The period is specified by a time interval ( Window in order of 100msec).
This event is generated if the errored frame count is equal to or greater than the specified
threshold for that period (Period Threshold). Errored frames are frames that had
transmission errors as detected at the Media Access Control sub layer.
Event Seconds Summary:
The Errored Frame Seconds Summary Event TLV counts the number of errored frame
seconds that occurred during the specified period. The period is specified by a time interval.
This event is generated if the number of errored frame seconds is equal to or greater than
the specified threshold for that period. An errored frame second is a one second interval
wherein at least one frame error was detected. Errored frames are frames that had
transmission errors as detected at the Media Access Control sub layer.
Symbol Period Error Event:
The Errored Symbol Period Event counts the number of symbol errors that occurred during
the specified period. The period is specified by the number of symbols that can be received
in a time interval on the underlying physical layer. This event is generated if the symbol
error count is equal to or greater than the specified threshold for that period.
Frame Period Error Event:
203 Publication date: Oct., 2011
Revision A1