Manufacture Technology GEFXL2-CSW28KX User Manual page 147

VLAN entries or it can be added to the new entries.
Port Members :

A row of check boxes for each port is displayed for each VLAN ID. To include a port in a
VLAN, check the box. To remove or exclude the port from the VLAN, make sure the box is
unchecked. By default, no ports are members, and all boxes are unchecked.
Adding a New VLAN :

Click to add a new VLAN ID. An empty row is added to the table, and the VLAN can be
configured as needed. Legal values for a VLAN ID are 1 through 4095.
The VLAN is enabled on the selected stack switch unit when you click on "Save". The
VLAN is thereafter present on the other stack switch units, but with no port members. The
check box is greyed out when VLAN is displayed on other stacked switches, but user can
add member ports to it.
A VLAN without any port members on any stack unit will be deleted when you click "Save".
The button can be used to undo the addition of new VLANs.
Buttons:

Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
Upper right icon (Refresh, |<<, >>):

You can click them for refresh the VLAN entries by manual. Or press clear to clean up the
VLAN table. Others press |<< or >> to upper or down page of the table.
137
Publication date: March, 2012
Revision A1