5-5.2 Ping6 - Manufacture Technology GEFXL2-CSW28KX User Manual

5-5.2 Ping6

This section allows you to issue ICMPv6 PING packets to troubleshoot IPv6 connectivity
issues.
Web Interface
To configure an ICMPv6 PING Configuration in the web interface:
1.Specify ICMPv6 PING
2.Specify ICMPv6 PING
3.Click Start.
Figure 5-5.2: The ICMPv6 Ping
Parameter description:
IP Address :

The destination IP Address with IPv6
Ping Size :

The payload size of the ICMP packet. Values range from 8 bytes to 1400 bytes.
Start:

Click the "Start" button then the switch will start to ping the device using ICMPv6 packet
size what set on the switch.
After you press , 5 ICMPv6 packets are transmitted, and the sequence number and roundtrip
time are displayed upon reception of a reply. The page refreshes automatically until
responses to all packets are received, or until a timeout occurs.
PING server 10.10.132.20
64 bytes from 10.10.132.20: icmp_seq=0, time=0ms
64 bytes from 10.10.132.20: icmp_seq=1, time=0ms
64 bytes from 10.10.132.20: icmp_seq=2, time=0ms
64 bytes from 10.10.132.20: icmp_seq=3, time=0ms
64 bytes from 10.10.132.20: icmp_seq=4, time=0ms
Sent 5 packets, received 5 OK, 0 bad
You can configure the following properties of the issued ICMP packets:
.
IP Address
Size.
282 Publication date: March, 2012
Revision A1