3- 9.2 Dynamic Mac Table - Manufacture Technology GEFXL2-CSW28KX User Manual

3- 9.2 Dynamic MAC Table

Entries in the MAC Table are shown on this page. The MAC Table contains up to 8192 entries,
and is sorted first by VLAN ID, then by MAC address.
Web Interface
To Display MAC Address Table in the web interface:
1. Click Dynamic MAC Table .
2. Specify the VLAN and MAC Address.
3. Display MAC Address Table.
Figure 3- 9.2: The Dynamic MAC Address Table information
Parameter description:
MAC Table Columns
Switch (stack only) The stack unit where the entry is learned.
Type :

Indicates whether the entry is a static or a dynamic entry.
VLAN :

The VLAN ID of the entry.
MAC address :

The MAC address of the entry.
Port Members :

The ports that are members of the entry.
Auto-refresh :

To evoke the auto-refresh icon then the device will refresh the information automatically.
Upper right icon (Refresh, Clear, <<, >>):

You can click them for refresh the MAC address entries by manual.or press clear to clean
up the MAC table. Others press << or >> to upper or down page of the table.
135
Publication date: March, 2012
Revision A1