Chapter 1 Operation Of Web-Based Management - Manufacture Technology GEFXL2-CSW28KX User Manual

Chapter 1
This chapter instructs you how to configure and manage the
Initial
CSW28KX
Configuration
easily access and monitor through any one port of the switch all the status
of the switch, including MIBs status, each port activity, Spanning tree
status, port aggregation status, multicast traffic, VLAN and priority status,
even illegal access record and so on.
T
After the GEFXL2-CSW28KX has been finished configuration the it
interface, you can browse it. For instance, type
the address row in a browser, it will show the following screen and ask
you inputting username and password in order to login and access
authentication.
The default username is
time to use, please enter the default username and password, and then
click the
login menu, you have to input the complete username and password
respectively, the GEFXL2-CSW28KX will not give you a shortcut to
username automatically. This looks inconvenient,
In the GEFXL2-CSW28KX, it supports a simple user management function
allowing only one administrator to configure the system at the same time.
If there are two or more users using administrator's identity, it will allow
the only one who logins first to configure the system. The rest of users,
even with administrator's identity, can only monitor the system. For those
who have no administrator's identity, can only monitor the system. There
are only a maximum of three users able to login simultaneously in the
GEFXL2-CSW28KX.
Operation of Web-based Management
through the web user interface.
he default values of the GEFXL2-CSW28KX are listed in the table below:
IP Address
Subnet Mask
Default Gateway
Username
Password
<Login> button. The login process now is completed. In this
N :
OTE
When you login the Switch WEB/CLI to manager. You must first
type the Username of the admin. Password was blank, so when
you type after
Management page to enter WEB/CLI.
When you login
management, you can use both ipv4 ipv6 login to manage
To optimize the display effect, we recommend you use Microsoft
IE 6.0 above, Netscape V7.1 above or FireFox V1.00 above and
have the resolution 1024x768. The switch supported neutral web
browser interface
2
With this facility, you can
192.168.1.1
255.255.255.0
192.168.1.254
admin
http://192.168.1.1
"admin" and password is empty. For the first
but safer.
the end Username,
GEFXL2-CSW28KX series
Publication date: March, 2012
GEFXL2-
in
please press enter.
switch Web UI
Revision A1