3-18.2 Sampler - Manufacture Technology GEFXL2-CSW28KX User Manual

3-18.2 Sampler

The section display the sFlow sampler what you set or you can edit it for your requirement.
That will help user based on a defined sampling rate, an average of 1 out of N
packets/operations is randomly sampled. This type of sampling does not provide a 100%
accurate result, but it does provide a result with quantifiable accuracy
Web Interface
To configure the sFlow Agent in the web interface:
1. Click Configuration, sFlow Agent, sampler
2. click the
3. Scroll to Sample Type to choice with None, Tx, Rx or All.
4. Click the save to save the setting
5. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
.
Figure 3-18.2: The sFlow sampler Configuration
Parameter description:
sFlow Ports :

List of the port numbers on which sFlow is configured.
sFlow Instance :

Configured sFlow instance for the port number.
Sampler Type :

Configured sampler type on the port and could be any of the types: None, Rx, Tx or All.
You can scroll to choice one for your sampler type.
to edit the sFlow sampler parameters
195
Publication date: March, 2012
Revision A1