2-5.2 Log - Manufacture Technology GEFXL2-CSW28KX User Manual

2-5.2 Log

This section describes that display the system log information of the switch
Web Interface
To display the log configuration in the web interface:
1. Click Syslog, Log.
2. Display the log information.
Figure2- 5.2: The System Log configuration
Parameter description:
Auto-refresh

To evoke the auto-refresh icon then the device will refresh the log automatically.
Level

level of the system log entry. The following level types are supported:
Information level of the system log.
Warning: Warning level of the system log.
Error: Error level of the system log.All: All levels.
ID

ID (>= 1) of the system log entry.
Time

It will display the log record by device time. The time of the system log entry.
Message

It will display the log detail message. The message of the system log entry.
Upper right icon (Refresh, clear,....)

You can click them for refresh the system log or clear them by manual, others
for next/up page or entry.
22 Publication date: March, 2012
Revision A1