Mvr; 3-7.1 Configuration - Manufacture Technology GEFXL2-CSW28KX User Manual

3-7 MVR

The MVR feature enables multicast traffic forwarding on the Multicast VLAN. In a multicast
television application, a PC or a television with a set-top box can receive the multicast stream.
Multiple set-top boxes or PCs can be connected to one subscriber port, which is a switch port
configured as an MVR receiver port. When a subscriber selects a channel, the set-top box or
PC sends an IGMP join message to Switch A to join the appropriate multicast. Uplink ports
that send and receive multicast data to and from the multicast VLAN are called MVR source
ports.

3-7.1 Configuration

The section describes user could set the MVR basic Configuration and some parameters in
the switch
Web Interface
To configure the MLD Snooping Port Group Configuration in the web interface:
1. Click Configuration, MVR, Configuration
2. Scroll the MVR mode to enable or disable and Scroll to set all
parameters.
3. Click the save to save the setting
4. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
Figure 3-7.1: The MVR Configuration
Parameter description:
MVR Mode :

Enable/Disable the Global MVR.
VLAN ID :

Specify the Multicast VLAN ID.
Mode :

Enable MVR on the port.
109
Publication date: March, 2012
Revision A1