Manufacture Technology GEFXL2-CSW28KX User Manual page 204

The value of the port number has to be typed into the text box.
The value accepted is within the range of 1-65535. But an appropriate port number not
used by other protocols need to be configured. By default, the port's number is 6343
Time out :

It is the duration during which the collector receives samples, Once it is expired the
sampler stops sending the samples. It is through the management the value is set before it
expires. The value accepted is within the range of 0-2147483647. By default it is set to 0.
Datagram Size :

It is the maximum UDP datagram size to send out the sFlow samples to the receiver. The
value accepted is within the range of 200-1500 bytes. The default is 1400 bytes.
Buttons:

Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
194 Publication date: March, 2012
Revision A1