Router Port - Manufacture Technology GEFXL2-CSW28KX User Manual

Parameter description:
Snooping Enabled :

Enable the Global MLD Snooping.
Unregistered IPMCv6 Flooding enabled :

Enable unregistered IPMCv6 traffic flooding. Please note that disabling unregistered
IPMCv6 traffic flooding may lead to failure of Neighbor Discovery.
MLD SSM Range :

SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run the
SSM service model for the groups in the address (Using IPv6 Address) range.
Proxy Enabled :

Enable MLD Proxy. This feature can be used to avoid forwarding unnecessary join and
leave messages to the router side.
Port:

The Port index what you enable or disable the MLD Snooping function.
Fast Leave :

To evoke to enable the fast leave on the port.

Router Port :


Specify which ports act as router ports. A router port is a port on the Ethernet switch that
leads towards the Layer 3 multicast device or MLD querier. If an aggregation member port
is selected as a router port, the whole aggregation will act as a router port.
Throttling :

Enable to limit the number of multicast groups to which a switch port can belong.
Buttons:

Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
98 Publication date: March, 2012
Revision A1