Manufacture Technology GEFXL2-CSW28KX User Manual page 134

L2 Priority :

L2 Priority is the Layer 2 priority to be used for the specified application type. L2 Priority
may specify one of eight priority levels (0 through 7), as defined by IEEE 802.1D-2004. A
value of 0 represents use of the default priority as defined in IEEE 802.1D-2004.
DSCP :

DSCP value to be used to provide Diffserv node behaviour for the specified application
type as defined in IETF RFC 2474. DSCP may contain one of 64 code point values (0
through 63). A value of 0 represents use of the default DSCP value as defined in RFC 2475.
Adding a new policy :

Click to add a new policy. Specify the Application type, Tag, VLAN ID, L2 Priority and DSCP
for the new policy. Click "Save".
Port Policies Configuration :

Every port may advertise a unique set of network policies or different attributes for the
same network policies, based on the authenticated user identity or port configuration.
Port :

The port number to which the configuration applies.
Policy Id :

The set of policies that shall apply to a given port. The set of policies is selected by check
marking the checkboxes that corresponds to the policies.
Buttons:

Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
124 Publication date: March, 2012
Revision A1