1. MVRP Mode
This configuration is to enable/disable MVRP Mode on perticular port locally.
Disable: Select to Disable MVRP mode on this port.
Enable: Select to Enable MVRP mode on this port.
The default value of configuration is disable.
2. MVRP rrole
This configuration is used to configure restricted role on an interface.
Disable: Select to Disable MVRP rrole on this port.
Enable: Select to Enable MVRP rrole on this port.
The default configuration is disable.
Auto-refresh :
To evoke the auto-refresh icon then the device will refresh the information automatically.
Upper right icon (Refresh):
You can click them for refresh the MVRP Port configuration information by manual.
164
Publication date: March, 2012
Revision A1