Nas; 4-5.1 Configuration - Manufacture Technology GEFXL2-CSW28KX User Manual

4-5 NAS

The section describes to configure the NAS parameters of the switch. The NAS server can be
employed to connect users to a variety of resources including Internet access, conference
calls, printing documents on shared printers, or by simply logging on to the Internet.

4-5.1 Configuration

This section describes how to configure NAS setting of IEEE 802.1X, MAC-based
authentication system, and port settings. The NAS configuration consists of two sections, a
system- and a port-wide.
Web Interface
To configure a System Configuration of Netwrok Access Server in the web interface:
1. Select "Enabled" in the Mode of
2. Checked Reauthentication Enabled.
3. Set Reauthentication Period (Default is 3600 seconds).
4. Set EAPOL Timeout (Default is 30 seconds).
5. Set Aging Peroid (Default is 300 seconds).
6. Set Hold Time (Default is 10 seconds).
7. Checked RADIUS-Assigned QoS Enabled.
8. Checked RADIUS-Assigned VLAN Enabled.
9. Checked Guest VLAN Enabled.
10. Specify Guest VLAN ID.
11. Specify Max. Reauth. Count.
12. Checked Allow Guest VLAN if EAPOL Seen.
13. Click Save.
Figure 4-5.1: The Network Access Server Configuration
Configuration.
Netwrok Access Server
240 Publication date: March, 2012
Revision A1