Table of Contents
Advertisement
Copyright © 2011 Manufacture Technology Corp. All rights reserved.
Copyright
The products and programs described in this User's Manual are licensed
products of Manufacture Technology, This User's Manual contains proprietary
information protected by copyright, and this User's Manual and all
accompanying hardware, software and documentation are copyrighted. No
parts of this User's manual may be copied, photocopied, reproduced,
translated or reduced to any electronic medium or machine-readable from by
any means by electronic or mechanical. Including photocopying, recording, or
information storage and retrieval systems, for any purpose other than the
purchaser's personal use, and without the prior experess written permission
of Manufacture Technology.
.
This manual gives specific information on how to operate and use the
Purpose
management functions of the GEFXL2-CSW28KX
The Manual is intended for use by network administrators who are
Audience
responsible for operating and maintaining network equipment;
consequently, it assumes a basic working knowledge of general
switch functions, the Internet Protocol (IP), and Simple Network
Management Protocol (SNMP).
The following conventions are used throughout this manual to
CONVENTIONS
show information.
See the Customer Support/ Warranty booklet included with the
WARRANTY
product. A copy of the specific warranty terms applicable to your
Manufacture products and replacement parts can be obtained from
your Manufacture Sales and Service Office authorized dealer.
Manufacture Technology does not warrant that the hardware will
Disclaimer
work properly in all environments and applications, and marks no
warranty and representation, either implied or expressed, with
respect to the quality, performance, merchantability, or fitness for
a particular purpose. Manufacture disclaims liability for any
inaccuracies or omissions that may have occurred. Information in
this User's Manual is subject to change without notice and does not
represent a commitment on the part of Manufacture. Manufacture
assumes no responsibility for any inaccuracies that may be
contained
commitment to update or keep current the information in this
User's Manual, and reserves the righter to make improvements to
this User's Manual and /or to the products described in this User's
Manual, at any time without notice.
This equipment has been tested and found to comply with the
FCC Warning
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
About This Manual
in
this
User's
ii
Manual.
Manufacture
Publication date: March, 2012
makes
no
Revision A1
Hide quick links:
Advertisement
Table of Contents
